Ultrasonic Energy Meter

Ultrasonic Energy Meter

FT101 ultrasonic flow meter is an industry flow meter which has the high accuracy 0.5% of reading and good performance in the very low velocity. TGA is our independent R&D technical, which based on the well known TDC calculate software, rate of sampling is greater than 300 times per second, so ensure the high accuracy and low velocity. It has no liquid type limited, all the clean liquid it can measure, widely application in oil industry, water treatment, pure water, diesel oil, chemical, sea water and etc. BTU capacity is an option. The most important part is that we have key technical, the master board and calculate software is all R&D by ourselves. That means we could do fully support and customization project.
Chat Now

Product Details

Transfer time technology.

Clampon type and wetted type sensor  both available, easy to install.Both clamp on

and wetted transducer could install without  cutting off the running water.

Highly accurate (0.5%) and repeatable(0.15%) flow measurement.

SDcard, RS485, 4-20mA

BTU (Energy meter) capacity

Competitive price

Ultrasonicflow meter use to measure the single medium, such as the pure water, cooling water, water, chemical, oil, milk, etc.Because clamp on type sensor install don’t need to break the pipe, so it widely use in the application which hard to cut off water, or use to measure the strongacid and alkaline liquid because it not need to touch  the liquid.We have the ability to customization

depend on  the environment, especially the pipe size under DN25


Inquiry